Webshop

For many divers, mounting a light system on a DPV has always felt natural, since they see their DPV as a useful tool and companion – even in the darkness. Using a DPV safely requires proper visibility ahead. When the surroundings get darker, powerful headlights support the diver’s orientation and make him more visible to the team.

That is why Seacraft always supported mounting a proper lighting system on the DPV. Simple attaching a flashlight to the DPV works, however, is not a perfect solution- due to small battery constraints, trimming and weighing challenges, and difficulty in turning ON/OFF.

Light output needs to be easily adjustable in order to compensate for the dazzling effect of small floating particles or to not interupt communication.

The Seacraft Light System fulfills these requirements, as it provides powerful, yet adjustable illumination. The system was designed for seamless integration with all Seacraft DPVs with installed power converter and draws its power via the E/O power outlet directly from the DPV’s battery. The light output can be controlled with the buttons on the DPV display.

One SLS2 set includes:

• 2 lamps (each with on/off switch), connected via y-cable (e/o cord)
• 2 screws to fasten the lamps on the Seacraft transport bracket

Please note, that the DPV must be equipped with the internal power converter (installable in Seacraft DPVs with serial number 129 and higher) and the E/O power outlet to use these lamps.

E/O output – single cable adapter allows to use Seacraft scooter, as a big battery pack – for heating system, lighting or any other external devices.

Seacraft power outlet requires an internal power converter to be installed in the electronic chamber.

The E/O output – twin cable adapter (2 x 70 cm) allows for using a Seacraft scooter as a big battery pack for a heating system, lighting or other external loads at the same time.

Now you do not need to choose the load, because you may connect both. With the E/O twin cord, you may connect your personal heating system in cold water and at the same time power the Seacraft Light System SLS2 or another external device.

But this is not all: Using the E/O twin cable adapter allows for setting up 2 external loads e.g. 2 heating systems or 2 sets of lights for even better lighting of caves or mines.

The Seacraft power outlet requires an internal power converter to be installed in the electronic chamber.

Secure and prestigious support for your DPV. Seacraft stands are made from POM and polycarbonate, to ensure durability and good look.

Scooter stand 160mm (dedicated for FUTURE models)

Scooter stand 208mm (dedicated for GHOST models)

This universal, lightweight stand weighing just 0,6 kg serves as a support and ensures safe and stable transport for all ranges of Seacraft scooters with housing diameters 160 mm and 208 mm.

A basic diver towing harness provides an attachment point for the scooter’s towing harness while operating DPV.

A towing harness is necessary in case the diver’s diving equipment does not come with a crotch strap to attach to the scooter’s harness.

Highly increases operator’s comfort, by transferring scooter’s pull on the body in optimal way.

Used for temporary locking scccoter’s trigger. Very useful on long-rage distance.