Webshop

Introducing the new Comfort Harness System III ! The direct successor of the Comfort Harness II. Both shoulder straps are equipped with the stainless steel buckles already introduced in the Public Safety Harness. Right and left on the shoulder straps are each 2 in the position adjustable D-rings. Also on the waist belt are 2 D-rings on the right and left.
Uniquely, one size fits all. By simply adjusting the shoulder pads, the complete size spectrum from XS - XXL including all intermediate sizes is covered.
Comfort Harness III is offered both as a hardware kit to mount it on any backplate, or as a completely dive ready version, either with stainless steel or aluminum backplate as standard or signature (with mounted vertical weight pockets and storage pack with integrated Trimmweight pockets).
FEATURES:
- One size fits ALL
- New stainless steel buckles on shoulder straps that hold more than 900 KG of pull
- Offered with aluminum or stainless steel OMS backplate
- (4) shoulder strap D-ring, (2) waist strap D-ring (2) crotch strap. D-ring are offered in stainless steel or aluminum.
- Adjustable size and comfortable shoulder pads.
- Perfect harness for both mono and double tanks.
- Includes 2" quick adjust crotch strap.

The OMS Backplate with SmartStream Harness can be quickly adjusted by pulling the waist straps forward. The shoulder straps secure to the diver’s shoulders and back - allowing proper adjustments instantly.

The Performance Mono Wing is a donut – style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ backpack, Aluminum or Stainless Steel Backplate using the Comfort harness III or SmartStream harness.

FEATURES:

Donut style configuration
Inflator located left side
Power inflator hose included
Interior z zipper backing
Dump valve left side
Light weight ideal for traveling diver
1000 denier nylon outer bag
Interior urethane backing protects against abrasions and punctures
Inner Bladder Polyurethane material, ultrasonically welded fittings and seams
Low Pressure (LP) inflation hose included

Deep Ocean Wings 2.0 include the Retraction Band System, which is designed to keep the wing folded behind the diver’s shoulders, reducing drag and the chance of entanglement. Works with single or twin cylinders. It has a single inflator with a corrugated hose connected to a non dumpable elbow connector uniquely attached in the top left position. On the top right is an over pressure valve with an adjustable length cord and knob.  There are two dump and over pressure valves located on the front lower left and right side. In addition to the built in single tank adaptor is a tank protection strap attached with Velcro. The grommets are reinforced with a second ring of material to eliminate potential weak points for wear or tear. It is made for double or single tank use and has an adjustable lift capacity simply by adjusting the internal bungees.FEATURES:

• Interior retraction band system
• Lift capacity: 48-60 lbs (21.7-27 kg)
• New style configuration
• 16″ Inflator hose on the left shoulder
• Power inflator hose included
• Interior zipper backing
• Dump valve on the lower left
• Dump valve on the upper right
• Stainless steel grommets
• 1000 denier nylon outer bag
• Interior urethane backing protects against abrasions and punctures
• Inner bladder polyurethane material, ultrasonically welded fittings and seams
• Double stitched seams to prevent fraying
• Donut style configuration for optimum air movement in any position

AVAILABLE COLORS

Black, Red/Black, Pink/Black, Gray/Black, Lizard Green/Black, Miami Blue/Black, Lava Orange/Black, Speed Yellow/Black, and Ocean Blue/Black

Tech/Rec is at its best with the Elite 2 Harness. The Elite 2 Harness System offers you all the features of a technical harness with the added comfort that recreational divers look for.

• Adjustable shoulder straps with quick release buckles provide easier donning and doffing of equipment
• Adjustable and removable shoulder pads with 3 adjustable stainless steel bent D-rings on each side
• 316 “”marine grade”” stainless steel used for all hardware waist buckle
• Adjustable sternum strap included allows for custom fit
• Backplate sold separately
• System weight (harness only): 1.7 lbs (0.77 kg)

Designed to meet all the needs of demanding technical divers, the Solo Harness System is clean, simple, and foolproof!

Does not include a backplate.

• EN AW 6061 aluminum
• 3mm thickness
• Hard Anodized Marine Black
• Laser cut & CNC bent
• 1.5 lbs / 1 kg

Our 2.0 backplate line is the foundation for the new Hollis technical harness
systems. The stainless version weighs in at 6.5lbs or just under 3 Kilos.

The Stainless Steel Backplate 2021 is laser cut and CNC bent, which gives it an awesome new look. The stainless version is 304 stainless and has a bead blast finish to avoid scratching, so it will continue to look this way after many years of use.

Geometry of the webbing slots is similar to our prior design to ensure reverse compatibility for all Hollis buoyancy accessories, so if you have a current Hollis harness, wing or weight system, this new plate will fit.

The ST35 is an excellent go-anywhere wing with the added lift for local cold-water dives but the streamlined design for dive travel.

Tank slots and tank cradle are included, allowing you to connect your wing and backplate without the need for a single tank adapter plate. This reduces weight and unnecessary accessories while traveling.

The two-piece bladder is a tough 1680 Cordura nylon outer shell that prevents abrasion and punctures, coupled with a 420-denier nylon inner bladder to maintain buoyancy. The lower OPV’s easy to reach for venting gas while horizontal or heads down, and the inflation design is a K style with a rugged crushproof rubber hose for easy positioning and oral inflation should you need to.

The DT 50 Wing features a 360 degree tapered profile for heavier cylinders, to increase lift towards the hips, promoting better horizontal trim in dive position while still allowing perfect surface floatation.

The DT 50 is focused on the dedicated drysuit diver, with heavier cylinders in cold water. Tank slots included on both models, which allows the occasional single tank dive without the need for a single tank adapter plate. This reduces weight and unnecessary accessories while traveling.

The bladder is a two-piece design, with a rugged 1680 Cordura nylon outer shell to prevent abrasion and punctures, and a 420-denier nylon inner bladder to maintain buoyancy. The lower OPV is easy to reach for venting gas while horizontal or heads down, and the inflator design is a K style with a rugged crushproof rubber hose for easy positioning and oral inflation should you need to.

The LX2 replaces the older LX pocket and is a great evolution that adds weight versatility with an easy-to-use design. LX2 uses a simple pinch and pull buckle, and a large nylon handle on the pouch to ditch or carry the weights. 

The pouch itself is zippered and holds 12 pounds total, but is partitioned to isolate weights within the pouch. The benefit is if the pouch is only partially filed, the partition will avoid the weight shifting around during the dive. This system is also reverse compatible to allow use with older Hollis backplates and harnesses. The LX2 system ships as a pair with two pockets and two internal pouches. 

The OMS Delrin Thumbwheels are designed as an option instead of the traditional metal wing nuts. Delrin material is very durable and long lasting in a salt water environment and will not rust or corrode as metal does. The unique three point design allows for better grip and handling even with gloves or in the cold water. The thread is size 5/16-18 which is standard for most bolt kits sold today. They are also compatible with the OMS book screws.

Mask pocket is an essential accessory for a spare mask, various accessories or souvenirs. It's attached to the waist belt of a wing set. To prevent sliding of a pocket on the waist belt, it's good to fix it with two tri-glide stoppers. Stocking colour is black with grey F logo but can be made of any our wing material with any embroidery colour which is available for wings. 

Made from standard Nylon, this Accessory Pouch is very durable. It features a velcro closure for you to secure your accessories, and is designed to be mounted on any standard nylon weight belts. It also features a grommeted drain hole for easy drainage when you surface back to land, and a plastic D-ring for easy clip-on to any BCDs.

Now you no longer have to be troubled about not having enough space for your little accessories.

SIZE: 12cm X 6.5cm X 7cm

Cummerbund extender. Extends the cummerbund of BC with 15-25 cm. Lenght 33cm , black color. Slides over with velcro attachement.

Power inflator X01 Tech Pro metal with metal buttons